I see the case was eventually dismissed. Another frivolous attempt by SJG, aka LloydSchoene. Whatever happened to LLoyd? He used to have an account, but founder must have band him.
Love to see him address this but it won’t happen. He’ll just refer to his organization, talk about how OSUs butt is sewn shut and how well guarded his F2F life is at the library.
He’s probably in the back of the library humping an overhead projector right now.
It’s impressive that SJG is able to build an organization using a library computer. Ok, my mistake. It’s an imaginary organization that SJG is attempting to build on a library computer.
What? Are you saying there isn't an organization?
I was hoping and praying to join it, I suppose I'll have to lower my hopes and take the job offer I received to become the manager of an FKK club. *sigh
Stutz Bearcat and Duesenberg Revival, started by Virgil Exner, retired from Studebaker and Chrysler, building on General Motors platforms. Pretty hokey cars if you ask me.
https://www.barrett-jackson.com/Events/E…
And they were always nicer too. Ford and Chrysler used to give stretch 5 seating rows by extending the rear overhand. That screws it for towing. But GM stretches it in the midships area, just behind the sliding door.
Don't know if they offer diesel V8 anymore.
They offer gasoline V6 or V8.
They also offer:
2.8L Duramax® Turbo-Diesel 4-cylinder engine (181 hp/369 lb.-ft. of torque) with 8-speed automatic transmission
I like! MBZ inspired.
They offer the 4500 cutaway, van, the heaviest load van cutaway. Ford similar.
Last time Shailynn had to run a gauntlet of old ladies with their prayer hankies, it was just like it had been with the Beatles at Heathrow Airport, he got his clothes ripped off of him.
^ San Jose Guy can I level with you for a minute? I mean you fucking sued General Motors and you won’t even say why, dodging the question makes you look like more of an ass that you already do on your own.
^ no someone told him if he stuck his dick in the gas cap of a Buick that it would feel like a blowjob from a goat. When he tried it he wound up in the emergency room and he was suing for medical expenses and pain and suffering.
I wish they still made front engine Corvettes. And the mid engine ones, they don't even give you a spare time. People will sell you one, but even with two trunks there is not room for it. And you couldn't even think about getting one of the regular wheels into a trunk.
But what I like about this is flat crank V8, like Ferrari, fires alternating bank, no chortling, a V8 that actually works corretly.
Shailynn is pissed because his mom still makes him wear that Kevlar reinforced vulcanized rubber jock strap which has stopped his voice from changing. Everyday he is becoming more and more like Liberace.
Personally I have never been a fan of General Motors.
But with the full sized vans and pickups, their stuff is good. And I liked the Astro and S-10.
They are the only one who still makes the full sized vans, and theirs did always have advantages of the the other two.
GM created the best motor ever, the 350 small block engine that first went into the corvettes in the late 60’s. So iconic they pulled out nearly 370 HP in the early 70’s version, but had to scale back on their output due to emissions standards. Those motors are highly used with the small time local dirt track racers because they are the most durable and have the ability to run at a higher rpm than other manufacturers like Oldsmobile and Ford. Chrysler motors had a little more torque, but mopar products got highly coveted to find them out on the track getting burnt up. Why did GM stop making the 350 small block motor 20 years ago? It’s a mystery to me.
GM made small block V8's in many sizes. Some were 298, 327, and 350cid. I think 327 had the bore of 350 but the crank of 298. That is what Joe Biden's Corvette has, 370hp.
GM never made canted valve hemi-heads. Always the valve pivots in a straight line.
Ford make hemi-head in Boss302 and Boss429 Mustang.
And Chrysler ignited the hp wars with its hemi-heads.
Today any car you can buy, except perhaps SmartCar, is a canted valve DOCH hemi-head.
'GM made small block V8's in many sizes. Some were 298, 327, and 350cid. I think 327 had the bore of 350 but the crank of 298.'
Maybe you can sue the library for the bad information you received.
There was a 283 and a 302 but not a 298 but that's the kind of incorrect information that we can expect from a moron shut in with zero real life experience when his sewn up asshole springs a leak.
You've been exposed so many times by so many people yet you pontificate about everything and the end result is you continue to demonstrate that you really don't know jack shit about anything.
This isn't a ford thread, go start one mr don't know jack shit.
The Chevy 283 was their 2nd? small block v8 following the earlier 265 and preceding the 327. The 283 was made for multiple years and was extremely popular. The Chevy 302 was manufactured 1967-1969 and only came in the original z-28 Camaro series of the same years.
The more you speak the more moronic you show yourself to be but then again it's no surprise to me that you're the prince of nitwits.
post proof of your claim or STFU!
Front Engine Corvette, real low hood. That is because GM has remained committed to push rods. The Daimler-Challenger does not have a hood that low, because of overhead cam.
GM did have those North Star Engines transverse in Cadillacs. And they made the Cadillac SLR, out of a Corvette. But that was years back. No more overhead cam V8s.
Yeah change the subject to other brands because you have zero proof to back up your claim that chevy made a small block 298ci engine.
You have no proof because it didn't happen yet you drone on and on thinking that people anticipate the shit that spews from your mouth because your asshole is sewn shut.
But what really happens is we laugh at you.
Your EX wife has more sense and knowledge than you, that's why she was able escape your clutches # PSYCHO NITWIT
No proof you're a fucking dimwit internet bullshitter that spews shit from your mouth because your EX wife sewed your asshole shut and a pussy because she castrated you at the same time!
38 comments
Latest
He’s probably in the back of the library humping an overhead projector right now.
The creep can't comment, junteenth has him locked out of the library! hehheh
It’s impressive that SJG is able to build an organization using a library computer. Ok, my mistake. It’s an imaginary organization that SJG is attempting to build on a library computer.
What? Are you saying there isn't an organization?
I was hoping and praying to join it, I suppose I'll have to lower my hopes and take the job offer I received to become the manager of an FKK club. *sigh
https://www.barrett-jackson.com/Events/E…
SJG
Jefferson Starship - Jane - 2018 School of Rock AllStars Team 6
https://www.youtube.com/watch?v=BdWq4w8D…
Taste of Honey
https://www.youtube.com/watch?v=1RKpk9tz…
****************************
I always consider these sorts of vehicles to be silly. But a neighbor has one.
https://en.wikipedia.org/wiki/Chevrolet_…
ended production April 2013.
getting up to 6 speed automatics
https://www.chevrolet.com/trucks
And this new stuff looks like it is made by Toyota.
SJG
In My Dreams
https://www.youtube.com/watch?v=-55rKa7f…
https://www.gmfleet.com/vans
And they were always nicer too. Ford and Chrysler used to give stretch 5 seating rows by extending the rear overhand. That screws it for towing. But GM stretches it in the midships area, just behind the sliding door.
Don't know if they offer diesel V8 anymore.
They offer gasoline V6 or V8.
They also offer:
2.8L Duramax® Turbo-Diesel 4-cylinder engine (181 hp/369 lb.-ft. of torque) with 8-speed automatic transmission
I like! MBZ inspired.
They offer the 4500 cutaway, van, the heaviest load van cutaway. Ford similar.
SJG
In My Dreams
https://www.youtube.com/watch?v=-55rKa7f…
https://www.zzounds.com/item--GIBLPS600?…
SJG
In My Dreams
https://www.youtube.com/watch?v=-55rKa7f…
https://www.zzounds.com/item--GIBLPS600?…
Bacon!
https://www.youtube.com/watch?v=QaJ-67YG…
Mass production is based on interchangeable parts, not have to fit things together. You are supposed to be able to just assemble it and have it work.
Never heard of having to do anything like this, and with the transmission off, and in iterations.
SJG
Jane - School of Rock
https://www.youtube.com/watch?v=BdWq4w8D…
I wish they still made front engine Corvettes. And the mid engine ones, they don't even give you a spare time. People will sell you one, but even with two trunks there is not room for it. And you couldn't even think about getting one of the regular wheels into a trunk.
But what I like about this is flat crank V8, like Ferrari, fires alternating bank, no chortling, a V8 that actually works corretly.
SJG
Personally I have never been a fan of General Motors.
But with the full sized vans and pickups, their stuff is good. And I liked the Astro and S-10.
They are the only one who still makes the full sized vans, and theirs did always have advantages of the the other two.
SJG
GM never made canted valve hemi-heads. Always the valve pivots in a straight line.
Ford make hemi-head in Boss302 and Boss429 Mustang.
And Chrysler ignited the hp wars with its hemi-heads.
Today any car you can buy, except perhaps SmartCar, is a canted valve DOCH hemi-head.
SJG
Maybe you can sue the library for the bad information you received.
There was a 283 and a 302 but not a 298 but that's the kind of incorrect information that we can expect from a moron shut in with zero real life experience when his sewn up asshole springs a leak.
You've been exposed so many times by so many people yet you pontificate about everything and the end result is you continue to demonstrate that you really don't know jack shit about anything.
SJG
The Chevy 283 was their 2nd? small block v8 following the earlier 265 and preceding the 327. The 283 was made for multiple years and was extremely popular. The Chevy 302 was manufactured 1967-1969 and only came in the original z-28 Camaro series of the same years.
THERE WAS NEVER A FACTORY 298!
SJG
post proof of your claim or STFU!
LMAO!
SJG
V6 and I4 overhead cam, but not V8s.
SJG
You have no proof because it didn't happen yet you drone on and on thinking that people anticipate the shit that spews from your mouth because your asshole is sewn shut.
But what really happens is we laugh at you.
Your EX wife has more sense and knowledge than you, that's why she was able escape your clutches # PSYCHO NITWIT
SJG